How to configure BitLocker encryption on Windows 11

How-to
By Mauro Huculak
published

You can use BitLocker encryption for extra data security. Here's how to enable the feature on Windows 11.

Windows 11 set up BitLocker
Windows 11 set up BitLocker (Image credit: Future)
Jump to:

On Windows 11, BitLocker adds an extra layer of security with encryption to protect your device and files from unauthorized access. When using encryption, the feature scrambles the data on the drive to make it unreadable for anyone without the correct decryption key (your account password).

The BitLocker security feature is available on Windows 11 Pro, Enterprise, and Education editions. However, on Windows 11 Home, you can use "device encryption," a limited version of BitLocker. It works identically to the full version but without many advanced management settings and capabilities, such as "BitLocker To Go." Also, when using device encryption, all the drives will encrypt automatically, while the full version of BitLocker allows you to choose the storage using encryption.

This guide will walk you through the steps to set up device encryption with BitLocker on your computer.

How to set up BitLocker on Windows 11 Pro

To configure BitLocker in the Pro edition of Windows 11, use these steps:

  1. Open Settings.
  2. Click on System.
  3. Click the Storage page on the right side.

(Image credit: Future)
  1. Under the "Storage management" section, click on Advanced storage settings.
  2. Click on Disks & volumes.

(Image credit: Future)
  1. Select the drive with the partition to encrypt.
  2. Select the partition to enable encryption and click the Properties button.

(Image credit: Future)
  1. Click the "Turn on BitLocker" option.

(Image credit: Future)
  1. Click the "Turn on BitLocker" option again.

(Image credit: Future)
  1. Select the option to back up the recovery key — for example, Save to your Microsoft account.
  • Quick note: You can always find the recovery key on your Microsoft account. Also, the option to save online is only available when the account is connected to a Microsoft account.

(Image credit: Future)
  1. Click the Next button.
  2. Select the "Encrypt used disk space only" option.

(Image credit: Future)
  1. Click the Next button.
  2. Select the "New encryption mode" option.

(Image credit: Future)
  1. Check the "Run BitLocker system check" option.

(Image credit: Future)
  1. Click the Restart now button (if applicable).

Once you complete the steps, the system will begin encrypting the data on the drive.

While in the "BitLocker Drive Encryption," it is also possible to encrypt other drives, such as secondary storage, external USB hard drives, and removable data drives, using "BitLocker To Go."

Remove BitLocker encryption

If you need to remove the system encryption, use these steps:

  1. Open Control Panel.
  2. Click on System and Security.
  3. Click on BitLocker Drive Encryption.

(Image credit: Future)
  1. Under the "Operating system drive" section, click the "Turn off BitLocker" option.

(Image credit: Future)
  1. Click the "Turn off BitLocker" button again.

After you complete the steps, the decryption process will take a while, depending on how large the drive is and your data.

How to set up BitLocker on Windows 11 Home

To configure BitLocker in the Home edition of Windows 11, use these steps:

  1. Open Settings.
  2. Click on Privacy & Security.
  3. Click the Device encryption setting.

(Image credit: Future)
  1. Turn on the Device encryption toggle switch.

(Image credit: Future)
  1. (Optional) Under the "Related" section, click the "BitLocker drive encryption" option.
  2. Under the "Operating system drive" section, click the "Back up your recovery key" option.

(Image credit: Future)
  1. Click the Save to a file option.
  2. Save the BitLocker recovery key in a different location.
  3. Click the Save button.

Once you complete the steps, BitLocker will turn on the system to encrypt the files on the drive.

This version of BitLocker is only available on some devices. If you don't find the option, the device most likely doesn't support encryption. You would typically see this feature on devices like Microsoft Surface devices and those from other brands like HP, Lenovo, Dell, etc.

Remove BitLocker encryption

To decrypt a device using BitLocker, use these steps:

  1. Open Settings.
  2. Click on Privacy & Security.
  3. Click the Device encryption setting.

(Image credit: Future)
  1. Turn off the Device encryption toggle switch.

(Image credit: Future)

After you complete the steps, the decryption process will begin on the device.

More resources

For more helpful articles, coverage, and answers to common questions about Windows 10 and Windows 11, visit the following resources:

Windows 11 Logo Se
Windows 11

Cutting-edge operating system

A refreshed design in Windows 11 enables you to do what you want effortlessly and safely, with biometric logins for encrypted authentication and advanced antivirus defenses.

Mauro Huculak
Mauro Huculak

Mauro Huculak is technical writer for WindowsCentral.com. His primary focus is to write comprehensive how-tos to help users get the most out of Windows 10 and its many related technologies. He has an IT background with professional certifications from Microsoft, Cisco, and CompTIA, and he's a recognized member of the Microsoft MVP community.