ASUSTOR AS6508TSource: Rich Edmonds / Windows Central

Installing an SSD (or two) inside the ASUSTOR AS6508T is a sure way to improve performance with the drive(s) acting as a form of cache. This makes accessing data stored on the NAS a quicker process, especially if multiple users are doing so. This guide will show you how easy it is to install an SSD.

Products used in this guide

How to install an NVMe SSD

  1. Remove the three small screws on the rear of the NAS, using a Philips screwdriver.
  2. Extract the outer shell by pushing towards the rear and lift the panel up.

    ASUSTOR AS6508TSource: Rich Edmonds / Windows Central

  3. Locate the two M.2 slots on the top of the inner chassis. (If your M.2 drives aren't 2280, meaning 22mm wide and 80mm long, you'll need to re-position the pre-installed standoffs.)
  4. Install the SSDs using screws provided with the ASUSTOR NAS to secure them in place.
  5. Re-install the outer shell.
  6. Secure the NAS together with the three small screws removed in step 1.

Now you're ready to pop into ADM and add the SSD as a cache. It's worth noting that if you plan on using the SSD cache for read-only, you'll be fine with one or two drives in RAID 0. Still, if you plan on writing to these SSDs for storage on your installed HDDs, I strongly recommend you have two in a RAID 1 configuration for data redundancy.

ASUSTOR AS6508T

You're going to need the ASUSTOR AS6508T. If you're looking for an 8-bay NAS with upgradable RAM, M.2 SSD slots, and an Intel processor, this is a solid example. It's a killer mid-tier NAS for the home or small office.

Samsung EVO 970 Plus

To take advantage of the cache feature, you'll need a good SSD and the Samsung EVO 970 Plus is about as good as you can get for performance and value.

We may earn a commission for purchases using our links. Learn more.